Description
T-handle bar with white epoxy shower holder 100 x 60
PELLET – 049340
Delivered with white ABS sliding shower holder.
White aluminium tube Ø 30 mm, white synthetic resin plates and covers, Ø 66 mm.
The design of this bar is coordinated with the accessories of the TRIOLO Series and the CONFORT products
| Material | Aluminium |
| Finish | Epoxy |
| Color | White |
| Dimensions | 600 x 1000 mm |
| Diameter Ø | 30 mm |
| Gross weight | 1.340 kg |
| Packaging | Plastic bag + Jumper to fit on spindle |
| Load capacity | 150 kg |
| CE – load capacity | 150 kg |
| Laboratory tests at | 200 kg |
Recommended installation height: 80 cm from the floor. Grab bars add safety to the user if they are installed according to the instructions. The forces supported by the wall fixing require a perfect selection of screws and plugs according to the nature of the wall support. We advise you to choose stainless steel screws to avoid any risk of corrosion in a humid environment (Ø 4 mm). Before drilling the wall, physically present the product against the wall and mark the drilling locations. All fixing points must be respected. After installation and before use, make sure that the fixing screws are tight. Do not use the grab bar as a step to reach anything, do not sit on it or hang from it.
MAINTENANCE
IMPORTANT: To guarantee the durability of this product and the safety of the user, we recommend the use of mild soap for cleaning. CAUTION: DO NOT USE cleaning products containing ketones, hydrocarbons, acids, bases, esters and ethers. After using a cleaning product, rinse with clear water.
| Width (cm): | 6 |
|---|---|
| Weight (kg) : | 1.5 |
| Packaging: | 1 |
| Main materials : | Plastic |
| Warranty: | 2 years |
| Origin: | made in europe |
| EAN13 | 3563390493403 |
Reviews
There are no reviews yet.