Pellet burner Q20 for insert and stove receiving logs from 40 to 55cm en ligne maintenant

QAÏTO 20 for your fireplace insert and wood stove

Features

Height of the cast iron burner: 105mm
Inner / outer diameter of cast iron burner: 220mm / 250 mm
Width of stainless steel plate: 280mm
Length of stainless steel plate: 360mm
Height of the installed Q20: 130 mm

Capacity: 1.7 kg of pellets Power: 10 kW

Operation of the QAÏTO burner

Fill your QAITO burner with pellets, then put a fire starter.
In less than 5 minutes, you will enjoy a generous and friendly fire that will burn for about an hour (*) and will heat you even longer thanks to the calories accumulated by the cast iron.
If you wish to restart your fire (**), add wood pellets to your QAÏTO over 4/5ths of the surface: the uncovered glowing embers will be used as firelighters. And there you go again for a new fire !
Cost of the outbreak: less than 0.45 €. (price calculated with a 15 kg bag of pellets at 3.65 €/u)

The Plus products of QAÏTO

• Ignition safety
• Economical and ecological: 1.7 kg of pellets / hour, for a very low cost (~ 0.45 € per refill)
• Cleanliness of the fireplace and the glass
• Fast temperature rise
• Fires up 3 times faster than wood
• Can be installed in any wood-burning stove or insert (***), without any work and without electricity!

(*) Each installation, each home, each lifestyle being a particular case, the manufacturer cannot commit to an exact combustion time.
(**) Allow for approximately 1 recharge per hour
(***) The supply air to the fireplace – primary air – must come from the grate at the bottom of the insert or wood stove.